| Skip Tooth Fret Blades 5" | ||||
| Olson No. | Univ. No. | Width x Thickness x TPI | Doz | Gross |
| 440-F | 2/0 | .022 x .010 x 28 | $3.15 | $31.65 |
| 441-F | 0 | .024 x .011 x 25 | $3.15 | $31.65 |
| 443-F | 2 | .029 x .012 x 20 | $3.15 | $31.65 |
| 445-F | 4 | .035 x .015 x 15 | $3.15 | $31.65 |
| 446-F | 5 | .038 x .016 x 12.5 | $3.15 | $31.65 |
| 447-F | 6 | .041 x .016 x 12.5 | $3.15 | $31.65 |
| 448-F | 7 | .045 x .017 x 11.5 | $3.15 | $31.65 |
| 450-F | 9 | .053 x .018 x 11.5 | $3.15 | $31.65 |
| 452-F | 11 | .054 x .019 x 9.5 | $3.15 | $31.65 |
| 453-F | 12 | .062 x .024 x 9.5 | $3.15 | $31.65 |
| The #2/0 - 2 - #2 are for intricate cutting (variable speed only). The #4 - 5 - 6 - 7 are good for woods, plastic, etc. (not metals) up to 3/4" thick. The #9 - 11- 12 are good for 3/4" or thicker. | ||||
| Reverse Tooth Fret Blades 5" | ||||
| Olson No. | Univ. No. | Width x Thickness x TPI | Doz | Gross |
| 443-R | 2 | .029 x .012 x 20 - 14 Rev | $3.80 | $38.30 |
| 446-R | 5 | .038 x .016 x 12.5 - 9 Rev | $3.80 | $38.30 |
| 448-R | 7 | .049 x .018 x 11.5 - 8 Rev | $3.80 | $38.30 |
| 453-R | 12 | .062 x .024 x 9.5 - 10 Rev | $3.80 | $38.30 |
| These blades clean off the burrs on the underside of soft woods (like pine); they are not as good on hardwoods. | ||||
| Double Tooth Fret Blades 5" | ||||
| Olson No. | Univ. No. | Width x Thickness x TPI | Doz | Gross |
| 434-D | 1 | .026 x .013 x 30 | $3.15 | $31.65 |
| 435-D | 3 | .032 x .014 x 23 | $3.15 | $31.65 |
| 436-D | 5 | .038 x .016 x 16 | $3.15 | $31.65 |
| 437-D | 7 | .044 x .018 x 13 | $3.15 | $31.65 |
| 438-D | 9 | .053 x .018 x 11 | $3.15 | $31.65 |
| 439-D | 12 | .061 x .022 x 10 | $3.15 | $31.65 |
| Pinned End Blades 5" | ||||
| Olson No. | Univ. No. | Width x Thickness x TPI | Doz | Gross |
| 424FP | .070 x .010 x 18.5 | $4.45 | $44.35 | |
| 405-P | .110 x .018 x 20 | $4.45 | $44.35 | |
| 411-P | .110 x .018 x 15 | $4.45 | $44.35 | |
| 412-P | .110 x .018 x 10 | $4.45 | $44.35 | |
| 420RP | .100 x .018 x 9 - 5 Rev | $4.45 | $44.35 | |
| Hobby Saw Blades (Pinned) 2 3/4" | ||||
| Olson No. | Univ. No. | Width x Thickness x TPI | Doz | Gross |
| 429 | .068 x .010 x 25 | $2.95 | $29.45 | |
| NEW! | ||||
| Precision Ground (Reverse) 5" | ||||
| Olson No. | Univ. No. | Width x Thickness x TPI | Doz | Gross |
| PG455 | 5 | .040 x .018 x 12 - 12 Rev | $5.40 | $54.35 |
| PG457 | 7 | .046 x .018 x 10 - 7 Rev | $5.40 | $54.35 |
| PG459 | 9 | .048 x .018 x 8 - 6 Rev | $5.40 | $54.35 |
| These blades are faster cutting, clean underside of work on pine, plywood. Not good on thick hardwood. | ||||